Bandsaw Parts, Saw Parts, Band saw Parts, Blade Guides, Saw Guides, Carbide Blade Guides, Hem Guides, Hem Saw Parts, Hem Parts, Hem Saws, Hydmech Parts, Hydmech Saws, Hydmech Guides, Hydmech Saw Parts,
Hydmech Bandsaws, Hydmech Band Saw, Amada Parts, Amada Guides, Amada Saw Parts, Amada Saws, Amada Bandsaw Parts, Amada Band Saw Parts, Amada Blade Brush, Amada Blade Guides, Amada Carbide Guides, Amada Belts, Bandsaw Blade Guides, Band Saw Blade Guides, Behringer Saw, Behringer Saw Parts, Behringer Parts, Behringer Blade Guides, Behringer Saw Guides, DoAll Saws, DoAll Saw Parts, DoAll Parts, DoAll Blade Guides,, DoAll Bandsaw Parts, DoAll Band Saw Parts, Kasto Guides, Kasto Parts, Kasto Saws, Kasto Saw Parts, Kasto Blade Guides, Kasto Bandsaws, Kasto Bandsaw Parts, Kasto Band Saw Parts,
Daito Parts, Daito Saws, Daito Saw Parts, Daito Bandsaws, Daito Band Saw Parts, Marvel Saws, Marvel Parts, Marvel Saw Parts, Marvel Bandsaw Parts, Marvel Machine Parts, Marvel Bandsaw, Marvel Band Saw, Marvel Blade Guides, Marvel Carbide Guides, Phoenix Parts, Phoenix Saws, Phoenix Bandsaws, Phoenix Saw Parts, Phoenix Bandsaw Parts, Spartan Saws, Spartan Saw Parts, Spartan Blade Guides, Spartan Saws, Spartan Bandsaw Parts, Wells Saw, Wellsaw Parts, Wells Parts, Blade Guides, Carbide Blade Guides, Bandsaw Guides, Saw Parts, Bandsaw Parts, Band Saw Parts, Hem, Hydmech, Amada, Behringer, Daito, DoAll, Kasto, Marvel, Phoenix, Spartan, Wellsaw, Vise Racks, Saw parts, Band Saw Parts, Blade Guides, Saw Guides, Bandsaw Repair Parts, Machine Repair, Saw Maintenance. SHARC Industries LLC, Saw Parts.

Cost: # NCCTB400A

$1,149.43 CAD
plus shipping and handling for a complete set of 4 guides.

Signigicant characteristics:

Replaces Part #'s
Lower Fixed Insert = 1350733
Lower Moveable Insert = 1350707a
Upper Fixed Insert = 1350732a
Upper Moveable Insert = 1350705a

Sharc Part # NCCTB400A

Proudly Made
In the U.S.A.

Back to SHARC Guides for Amada Saws Main Page

All Blade Guides

Cost: # NCCTB400ABU

$1.029.25 CAD
plus shipping and handling for a complete set of 2 guides.

Signigicant characteristics:

Support your tooling investment with SHARC backup guides for your CTB400. Designed to cost less and last longer than OEM they offer a 1200% more contact area. Yes, 1200%. They have carefully radiused edges, a reduced weight over OEM and no moving parts.

OEM assembly shown for example

Note: Destroyed bearing on the left.

Once any bearing play is present, the rollers cock to the side and the blade rides next to the roller cutting into the housing.

Note: Siezed bearing on the right.

Once the bearings seize and the roller stops rolling, the blade is supported by approximately .062" of carbide which is not moving. The roller quicky grooves and places unwanted stress on the blade backing.

What's behind your High Dollar Carbide Blade?

NCCTB400BU

Home